|
home » sectors: schools
» BSF:
light reflectance values (LRVs) »
Veneers, Wood Grain Laminates
and Architectural Hardware
The following figures give an indication of the Light Refl
ectance Values (LRVs) of commonly used door face materials and
ironmongery finish options. These are indicative* figures based
on Leaderflush Shapland's initial testing.
Taking the below indicative figures as examples, a visual
contrast greater than 30 points between door facing and lever
handle can be achieved through the use of steamed beech and
satin anodised aluminium.
| Satin anodised aluminium |
75.43 |
| Steamed beech |
35.61 |
| Difference in LRV |
39.82 |
However the use of American white oak and brushed stainless
steel only creates a LRV difference between handle and face of:
| Brushed stainless steel |
44.81 |
| American white oak |
27.69 |
| Difference in LRV |
17.12 |
Therefore, when specifying door facings and ironmongery it is
important to consider LRV differences and how they can be
achieved to meet the requirements of BS8300 and Part M. Leaderfl
ush Shapland can provide advice on appropriate materials that
achieve the required LRV differences.
* Veneer is a natural material,
variations in shade and colour will occur and will usually
diminish over time.
* Please note: Due to monitor variations,
certain products may differ slightly in colour from the above
images.
|
